Sump Pump: Prostormer 1HP 3700GPH Submersible Water Pump for Pool, Pond, Garden, Cellar, Aquarium, and Irrigation

If you want the pump to operate in a low water level environment (where the water level does not exceed the pump), the float switch must be secured to the pump. The water pump operates on the principle that the float switch moves downward vertically, with the beads inside being stuck on the line below the float switch, causing the water pump to start automatically. ⚡⚡【Important Note】When starting to use the pump, it must be submerged in water at a slight angle to allow any remaining air to escape.⚡⚡ 🔥【1HP High Power】The Prostormer Sump Pump utilizes 1HP power, which is more efficient than a standard 3/4HP sump pump; with a maximum 3700 Gallon Per Hour rating, it can handle any draining job in a fraction of the time. 🔥【Multiple Outlet Sizes】The pump has 3 different diameter outlets (1 inch, 1-1/4 inch, 1-1/2 inch) to accommodate different hose sizes as needed based on the flow rate. The larger the flow, the wider the outlet should be. 🔥【Continuous Operation Mode】When the float switch is secured to the sump pump, the pump will continue to operate constantly. If the pump is unable to pump water, the power should be immediately cut off to prevent the coil from burning out. 🔥【Automatic ON/OFF Mode】The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will automatically start operating under the control of the float switch. If the pump is unable to pump water, it will automatically disconnect the power. 🔥【Sealed Structure & Durable Construction】The sump pump features a sturdy sealed structure and a durable thermoplastic body to prevent corrosion. The raised base plate also prevents debris from collecting in the sump pit.

product information: