1/4HP Submersible Water Pump with Automatic Float Switch

【Friendly Tips】To ensure the air is released, please submerge the pump into the water at a slight angle when starting to use it.

【Friendly Tips】Do not operate the water pump for more than 2 minutes without water. If used without water, the motor has a built-in overheating protection function. Please wait for 15 minutes for the motor to cool down before using it again.

【Friendly Tips】This pump is only suitable for clean water with impurity particles less than 1mm. Using it to pump other sewage may cause damage to the machine.

【Powerful Submersible Pump】Equipped with a 1/4HP power motor, this pump can deliver up to 1580GPH and reach a maximum delivery height of 20 feet. It is suitable for ponds, swimming pools, sprinkler systems, irrigation systems, gardening, rain barrels, and flooded basements.

【Multiple Outlet Options】There are three outlet options (3/4'', 1'', 1-1/2'') available to choose from based on the desired flow rate. The wider the outlet, the higher the flow rate.

【High-Quality Material】This pump is made of durable and corrosion-resistant thermoplastic composite material, which extends its service life.

【Automatic Float Switch】When the water level rises above the pump, the float switch automatically activates the pump. When the water level is below the pump, you should manually lift the float to start pumping. Note: In case of failure to pump water, immediately lower the float switch or disconnect the power to avoid burning out the coil.

【Overheat Protection】The water pump is equipped with a thermal protection circuit that automatically shuts off the device when it overheats.

product information: